EasyManua.ls Logo

RoentDek DLD40 User Manual

RoentDek DLD40
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RoentDek
Handels GmbH
Supersonic Gas Jets
Detection Techniques
Data Acquisition Systems
Multifragment Imaging Systems
MCP Delay Line
Detector Manual
(Version 11.0.1304.1)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the RoentDek DLD40 and is the answer not in the manual?

RoentDek DLD40 Specifications

General IconGeneral
Detector TypeDelay Line Detector
Active Area40 mm diameter
Time Resolution< 100 ps
Max Count Rate> 1 MHz
Detection PrincipleMicrochannel Plate (MCP)

Summary

1 The Microchannel Plate Detector with delay-line anode

1.1 General Description

Overview of the MCP detector's functionality, performance, and basic operating principles for particle/photon detection.

3 The Front-end Timing Electronics Modules: Amplifier & CFD Module

3.4 Connecting and Operating the ATR19

Instructions for connecting and operating the ATR19, including power settings and initial checks.

3.7 Final Adjustment for Detector Operation

Steps for final adjustment of the ATR19, verifying signals and tuning amplifier gain for optimal detector performance.

4 Data Acquisition Hard- and Software

4.4 Starting the CoboldPC 2011 R3 Software

Guide to starting and using CoboldPC software for data acquisition and analysis, covering commands and setup.

5 High Voltage Supplies

5.1 The HV 2/4 Dual High Voltage Supply Module

Details of the HV 2/4 dual HV supply module, its features, voltage settings, and safety precautions.

Appendix: (MCP's): STORAGE, HANDLING and OPERATION of MICROCHANNEL PLATES

OPERATION

Recommendations for operating MCPs, including vacuum conditions, voltage application, and temperature limits.