Rohde & Schwarz CMU200 Service Manual

Installing the Options CMU
1100.4903.82 4.6 E-4
Option UNIV. SIGN. UNIT CMU-B21 1100.5200.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option (see also chapter 3, Replacing the OPTION UNIV. SIGN. UNIT CMU-B21 1100.5200.02).
Option AUDIO-GEN. + ANA. CMU-B41 1100.5300.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option (see also chapter 3, Replacing the OPTION AUDIO-GEN. + ANA. CMU-B41 1100.5300.02).
Option SPEECH CODEC for CMU-B21 CMU-B52 1110.5400.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option (see also chapter 3, Replacing the OPTION SPEECH CODEC CMU-B52 1100.5400.02).
Option Bluetooth for CMU CMU-B53 1100.5700.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option.
Option FLOPPY DISK DRIVE CMU-U61 1110.5500.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option (see also chapter 3, Replacing the OPTION FLOPPY DISK DRIVE CMU-U61 1110.5500.02).
Option Abis Interface Unit CMU-B71 1100.6406.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option.
Option CDMA (IS95) Signalling Unit CMU-B81 1100.6506.02
To this end the instrument must be opened. Proceed according to the instructions enclosed with the
option.
SW Packages for various network tests CMU-Kxx
The software options do not require opening of the instrument. Proceed according to the instructions
enclosed with the options.

Rohde & Schwarz CMU200 Specifications

General

Brand	Rohde & Schwarz
Model	CMU200
Category	Test Equipment
Language	English