Rohde & Schwarz CMU200 Service Manual

Measuring Instruments and Auxiliary Equipment CMU
1100.4903.82 1.4 E–4
DUT
(CMU)
NRV-Z4
NRVD
-33 dBm/
-16 dBm
TX2
RF1 /
RF2
DUT
(CMU)
-93 dBm to -33 dBm/
-76 dBm to -16 dBm/
-55 dBm to +5 dBm
TX3
RF1 /
RF2 /
RF3 OUT
FSIQ or FSE
10 MHz Reference Freq.
DUT
(CMU)
RF-PreAmp
36 dB
FSE
or FSIQ
-130 dBm to -93 dBm/
-117 dBm to -76 dBm/
-90 dBm to -55 dBm
10 MHz Reference Freq.
TX4
RF1/
RF2/
RF3 OUT
General TX measurements
Test setup TX5:
DUT
(CMU)
Spectrum
analyzer
(FSE or
FSIQ)
10 MHz Reference Freq.
RF1, RF2, RF3
AUX3, pin2
ext. Trigger input
TX5
RX Level measurements
Test setup RX1, RX2 (depending on level range):

Rohde & Schwarz CMU200 Specifications

General

Brand	Rohde & Schwarz
Model	CMU200
Category	Test Equipment
Language	English