Rohde & Schwarz CMU200 Service Manual

R&S PB Installation Instructions CMU-B12 OCXO REF.OSC. Bi/1CMK 22.02.99 1100.5180.00 01.00
page 2 of 5
1 Preparation
1.1 Switch off unit and unplug power cable.
1.2 Screw off cabinet feet (four cross-recessed screws, size 2).
1.3 Place unit on handles at the front, push casing upwards and remove (Fig. 1).
Fig. 1

Rohde & Schwarz CMU200 Specifications

General

Brand	Rohde & Schwarz
Model	CMU200
Category	Test Equipment
Language	English