Module and Cable Exchange CMU
1100.4903.82 5.2 E-3
The defective parts must be sent back with a returned accompanying document containing the
following information:
• Stock number, serial number and designation of the dismounted part,
• Precise description of the error,
• Stock number, serial number and designation of the instrument the part was dismounted from,
• Date of dismounting,
• Name of the technician who exchanged the part.
A returned accompanying document is provided with each replacement module.
Table 5-1 List of power cables available
Stock No. Earthed-contact connector Preferably used in
DS 006.7013 BS1363: 1967 complying with
IEC 83: 1975 standard B2
Great Britain
DS 006.7020 Type 12 complying with SEV-regulation
1011.1059, standard sheet S 24 507
Switzerland
DS 006.7036 Type 498/13 complying with
US-regulation UL 498, or with IEC 83
USA/Canada
DS 006.7107 Type SAA3 10 A, 250 V,
complying with AS C112-1964 Ap.
Australia
DS 0025.2365
DS 0099.1456
DIN 49 441, 10 A, 250 V, angular
DIN 49 441, 10 A, 250 V, straight
Europe (except Switzerland)
To Next Page
Loading...
Need help?
General
