Rohde & Schwarz CMU200 - Page 207

CMU Module and Cable Exchange
1100.4903.82 5.9 E-3
Current No. Designation Stock No. Electr.No.
710 OCXO REFERENCE OSC. 1100.2900.03
CMU-B21 UNIVERS.SIGN.UNIT
1100.5200.02
730 UNIV. SIGN. UNIT
1100.5216.02
7
1100.5216.03
8
A 8 / A 9
735 LINK HANDLER BOARD 1097.3570.02 A 400
740 DSP MODULE0
1097.3106.03
9
1097.3129.03
9
A 440
741 DSP MODULE1 1097.3106.03
9
1097.3129.03
9
A 450
742 DSP MODULE2 1097.3106.03
9
1097.3129.03
9
A 460
750 I/Q OUT MODULE 1100.2000.02 A 430
CMU-B41 AUDIO-GEN. + ANA.
1100.5300.02
755 AUDIO BOARD 1100.2800.02 A11
756 DSP MODULE 1097.3106.03
9
1097.3129.03
9
A1101
757 RF cable 1100.3659.00
W 34
∗
758 RF cable 1100.3665.00
W 40
∗
CMU-B52 SPEECH CODEC
1100.5400.02 A 420
760 SPEECH CODEC 1100.2730.02
765 DSP MODULE3 1097.3106.03
9
1097.3129.03
9
A 470
CMU-U61 FLOPPY DISK DRIVE
11005500.02
780 Floppy 1091.2072.00
790 Support 1091.0228.00
800 Frame 1091.0211.00
7
1100.5216.02 contains DSP MODULES 1097.3106.03 and I/Q OUT MODULE 1100.2000.02
8
100.5216.03 contains DSP MODULES 1097.3129.03 and I/Q OUT MODULE 1100.2000.02
9
New DSP MODULE 1097.3129.03 replaces old DSP MODULE 1097.3106.03. 1097.3129.03 cannot be replaced by 1097.3106.03.
♣
If one of the new boards (620...660) is used, all other boards (620...660) must be replaced.