Rohde & Schwarz R&S NRP - Using Windows; Closing Windows (Close); Creating Windows (Init); Opening Windows (Open)

Displaying measurement results (Windows menu) R&S NRP
1144.1400.12 4.28 E-2
Using windows
The labelling of the second rocker switch in the Windows menu is context-sensitive and changes ac-
cording to the status of the active window.
 Open opens the selected window.
 Init opens and initializes the selected window.
 Close closes the selected window.
 Expand expands all windows to fill the display.
 Arrange arranges all windows in cascade fashion.
Fig. 4-24 Windows menu, softkeys for controlling the windows
Opening windows
Windows menu:
Open | Init – ( )
ä
Opens a window with the previous settings. This means that a meas-
urement which has been removed from the display can be restored.
Remote Control
DISPlay[:WINDow][1..4][:STATe][?] ON
Creating windows
Windows menu:
Open | Init – ( )
ä
Opens a window with preset values. Configures a completely new
measurement.
Closing windows
Windows menu:
Close | Expand – ( )
ä
Closes an opened window. The sizes of any remaining windows are
adjusted accordingly.
Remote Control
DISPlay[:WINDow][1..4][:STATe][?] OFF
WindowsOpen
WindowsInit
WindowsClose