System settings (System menu) R&S NRP
1144.1400.12 4.60 E-2
Selftest
While booting up, the R&S NRP performs a system test. The system test is described in Chapter 1,
Welcome screen and function test. Hardware faults are reported at this stage.
The Selftest dialog box in the System menu is used to check the keyboard and the display and to start a
selftest function in the sensors.
System menu:
Test… –
( )
ä
Fig. 4-57 Selftest dialog box
Keyboard… – ( )
ä ä
Opens the dialog box for testing the keyboard.
Display Test –
( )
Patterns ä ä
Displays a sequence of different test patterns for checking the display.
The procedure can be aborted by pressing any key.
Sensor A B ... –
( )
Test Sensor ä ä
The right-hand softkey starts a hardware test function in the sensor
selected with the left-hand softkey.
Remote Control
SYSTem:SENSor[1..4]:TEST?
Test Sensor –
( )
Details
ä ä
Opens a window containing detailed data of the sensor test.
SystemTest…
To Next Page
Loading...
