Rohde & Schwarz R&S NRP - Test Generator; System Information; Information about Sensors

System settings (System menu) R&S NRP
1144.1400.12 4.62 E-2
Test generator
How to use the test generator (option R&S NRP-B1) for  Zeroing is described on page 4.3.
As it is a high-precision generator with an output power of 1 mW at 50 MHz, it can also be used for
other applications.
System menu:
Power Ref – ( )
Off On ä ä
Switches the test generator on/off.
Remote Control
OUTPut:ROSCillator[:STATe][?] ON | OFF
System information
Information about sensors
The following information about connected power sensors can be obtained with the Info:Sensor dialog
box:
• Type and material number of sensor
• Serial number
• Software status
• Date of last calibration
• Frequency and power ranges
• Other technical data
System menu:
Info – ( )
Sensor… ä
Fig. 4-59 Sensor Info dialog box
SystemInfo Sensor
SystemPower Ref