Rohde & Schwarz R&S NRP - Hardkeys

Hardkeys R&S NRP
1144.1400.12 4.2 E-2
Hardkeys
The main settings for the Power Meter R&S NRP can be accessed via hardkeys.
Stored setting
({PRE}SET) is used to change the instrument to its default state (Preset) or to a user-defined (Setup)
state (maximum of 10 possible); pressing this key once opens the File menu; pressing it a second time
loads the Preset setting. The user-defined setups and settings for measurements on mobile radio stan-
dards can also be loaded from the File menu.
Hardkey
({PRE}SET)
Fig. 4-1 Setup dialog box
Preset – ( )
ä ä
or
({PRE}SET)
ä
Changes the R&S NRP to its default state (Preset).

Tip
The black background of the text indicates that the function can also be
started by pressing the ({PRE}SET) hardkey if the File menu is open.
Remote Control
*RST (Default state for remote-control operation)
or
SYSTem:PRESet (Default state for manual operation)
({PRE}SET)