R&S NRP Management of settings (File menu)
1144.1400.12 4.49 E-2
Management of settings
Default setting (Preset), p. 4.49.
Loading user-defined settings und Storing user-defined settings, p. 4.49/4.50.
Loading settings for mobile radio standards, p. 4.50.
Programming aids, p. 4.52
Assigning names to windows, p. 4.52.
Fig. 4-42 File menu
Default setting
The Preset softkey in the File menu changes the R&S NRP to its default setting. The black background
of the text indicates that the function can also be started by pressing the ({PRE}SET) hardkey.
In the default setting, a window is opened for each connected sensor. The default setting is sensor-
specific.
Storing user-defined settings
The R&S NRP provides 19 memory spaces in which complete device settings can be stored (Setup
memory). Settings can be stored by using the
Save Setup… dialog box. The memory spaces can be la-
belled with a name for identification.
File menu:
Setup –
( )
Save ä
Fig. 4-43 Recall Setup dialog box
[Setup]
– ( )
ä ä
Selects a setting.
Edit Name –
( )
ä ä
Used to rename the selected setting.
Remote Control
MEMory:STATe:MAP <string>, 1..19
File - menu
To Next Page
Loading...
