Rohde & Schwarz R&S NRP - Information about the R&S NRP; System Info Dialog Box

R&S NRP System settings (System menu)
1144.1400.12 4.63 E-2
A | B | C | D – ( )
ä↔ä
Tabs for selecting the sensor.
(¶Menu )
This dialog box can be closed with the (¶Menu ) key.
(â) (ô)
The up/down cursor keys can be used to scroll the window contents if
they cannot all be viewed simultaneously.
Remote Control
SYSTem:SENSor[1..4]:INFO? [<string>]
 Tip
The possible values for the <string> parameter are exactly the same as the items
shown in this dialog, e.g. "Manufacturer" or "HWVersion". Thus, the values available for
a specific sensor model are very easy to determine.
Information about the R&S NRP
The Info:System dialog box displays the following basic-device characteristics:
• Type and material number of sensor
• Serial number
• Software status of system, BIOS and keyboard controller
• Installed options
• Memory expansions
• Ethernet MAC address (for instruments with option R&S NRP-B4 installed)
System menu:
Info – ( )
System… ä
Fig. 4-60 System Info dialog box
(¶Menu )
The dialog box can be closed with the (¶Menu ) key.
(â) (ô)
The up/down cursor keys can be used to scroll the window contents if
they cannot all be viewed simultaneously.
Remote Control
SYSTem:INFO? [<string>]
SystemInfo System