Rohde & Schwarz R&S NRP - Configuring the Remote Control Interfaces; Configuring the GPIB; Selecting a Remote Control Interface; Remote Dialog Box

R&S NRP System settings (System menu)
1144.1400.12 4.55 E-2
Configuring the remote control interfaces
Selecting a remote control interface
System menu:
Remote… – ( )
ä
Fig. 4-50 Remote dialog box
GPIB Ethernet – ( )
ä ä
Selects the installed remote control interfaces or turns them off.
Configuring the GPIB
Remote dialog box:
GPIB USB –
( )
ä↔ä
Fig. 4-51 Remote dialog box, GPIB
GPIB Address – ( )
ä ä
A GPIB address in the range 0 to 30 can be selected.
RemoteControl
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>
SystemRemote
Remote : GPIB