Rohde & Schwarz R&S NRP - Menu Layout

R&S NRP Menu layout
1144.1400.12 3.5 E-2
Menu layout
Sensor
All sensor settings can be made using the
Sensor menu.
The type and details of data acquisition can be specified
with this menu.
See Chapter 4, section "Data acquisition and parameters",
for a detailed description.
Windows
The
Windows menu is used to configure windows and the
result display in the windows.
See Chapter 4, section "Displaying measurement results",
for a detailed description.
Measurement
The details of postprocessing are summarized in the
Meas-
urement
menu.
See Chapter 4, section "Configuring measurements", for a
detailed description.