Rohde & Schwarz R&S NRP - IP Address - Dialog, Manual; IP Address - Dialog, DHCP

R&S NRP System settings (System menu)
1144.1400.12 4.57 E-2
Fig. 4-54 IP Address – Dialog,
Manual
Fig. 4-55 IP Address – Dialog, DHCP
Manual DHCP – ( )
ä↔ä
Selects between configuring the IP address manually or automatically.
Remote control
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>
IP Address – ( )
ä↔ä
Manual input of IP address.
Mask – ( )
ä↔ä
Manual input of network mask.
Gateway – ( )
ä↔ä
Gateway computer connecting the local network with other networks.
For automatic assignment, a DHCP server must be accessible in the network.
If the R&S NRP is to be integrated into a larger network, please contact your network administrator
regarding the data to be set.
If the network consists only of the R&S NRP and the control computer, the two units can be connected
with each other directly using a special network crossover cable. The IP addresses are then set manu-
ally and can, for example, be selected according to the following table:
Table 4-1 Example of a network configuration for a direct R&S NRP – PC connection using a
crossover cable.
R&S NRP PC
IP Address
192.168.0.2 192.168.0.1
Mask
255.255.255.0 255.255.255.0
Gateway
192.168.0.3 192.168.0.3