R&S NRP Window handling
1144.1400.12 2.11 E-2
Window handling
Up to four windows can be shown simultaneously on the R&S NRP‘s display. Each window can be con-
figured for a separate measurement. The following examples show how to handle windows.
1 Opening, creating, zooming and closing windows.
({PRE}SET)
*
¾ Press the ({PRE}SET) key twice.
|
A display window indicating the result from sensor A (in
dBm) appears.
– ( )
*↔ *
¾ Using the topmost rocker switch or the cursor keys
(ÕÖ), select the Windows menu.
The
Windows softkey can be used to select which window
the functions in the
Windows menu and in the Measurement
menu will act on.
9 Tip
The cursor keys (â ) (ô ) can, in most cases, be used
instead of the rocker switch to select windows. This also
applies to opened dialog boxes.
Windows – ( )
1 2 3 4 *↔ *
¾ Select window 1.
To Next Page
Loading...
