Rohde & Schwarz R&S NRP - Page 53

Window handling R&S NRP
1144.1400.12 2.12 E-2
The third softkey is now labelled
Close | Expand.
Close | Expand – ( )
*
¾ Press the Expand key
The window expands to occupy the full display height and
indicates all parameters relevant to the measurement.
The currently displayed values are the default values
obtained after a preset.
Instead of
Expand, the Arrange function is now available to
arrange all opened windows.
(¶ MENU)
*
¾ Open the menu again.
Close | Arrange – ( )
*
¾ Press the Arrange key.
Window 1 returns to its previous size.
The following steps show the difference between the
Open and Init functions. You first have to change two set-
tings of window 1.
Dig D/A – ( )
*
¾ Using the Dig D/A softkey, activate the analog display
of results.
– ( )
*↔ *
¾ Go to the Measurement menu and select Relative On.
¾ Return to the Windows menu.