R&S NRP Window handling
1144.1400.12 2.13 E-2
Window 1 now displays the A Rel function on an analog
scale.
Close | Arrange – ( )
*
¾ Now, close window 1 with the Close softkey.
“Select” in
Window shows that window 1 is still selected.
The labelling next to the third softkey is now
Open | Init.
Open | Init – ( )
*
¾ Now, press the Open softkey (not Init).
The appearance of the window has not changed, and all
window-specific settings have been maintained.
Close | Arrange – ( )
*
Open | Init – ( )
*
¾ Again close window 1 with Close, but open it this time
with Init.
The window again displays the measurement function
A
in digital format.
The difference between
Open and Init is that Open keeps
the values of all the parameters that have been previ-
ously set in this window while Init sets all the parameters
to their default values.
Caution: This function only resets the window settings
made in the
Windows and Measurement
menus, but it does not affect the sensor set-
tings!
To Next Page
Loading...
