Rohde & Schwarz R&S NRP - Page 306

R&S NRP Remote Control - Commands
1144.1400.12 6.131 E-3
"NADC/UPLINK"
Sensor parameter Remote control command in short form Value
Sensor Mode
SENS:FUNC "POW:XTIM"
Integration Time
SENS:APER
40 ms
Duty Cycle
SENS:DCYC
16.267 %
Duty Cycle Correction
SENS:DCYC:STAT ON
Smoothing
SENS:SMO OFF
Dropout Tolerance
SENS:BURST:DTOL
3 ms
Exclude Time Start
SENS:TIM:EXCL:STAR
130 µs
Exclude Time End
SENS:TIM:EXCL:STOP
140 µs
Number Of Timeslots
SENS:TSL:COUN
6
Timeslot Width
SENS:TSL:WIDT
6.667 ms
Timegate Offset
SENS:TGAT:OFFS:TIME
1: 130 µs
2: 20.130 ms
Timegate Time
SENS:TGAT:TIME
1: 6.390 ms
2: 6.390 ms
Scope Offset Time
SENS:TRAC:OFFS:TIME
-500 µs
Scope Capture Time
SENS:TRAC:TIME
42 ms
Scope Number Of Points
SENS:TRAC:POIN
312
Scope Realtime
SENS:TRAC:REAL OFF
Trigger Delay
TRIG:DEL
0 s
Trigger Level
TRIG:LEV
-30 dBm
Trigger Source
TRIG:SOUR INT
Trigger Slope
TRIG:SLOP POS
Trigger Holdoff
TRIG:HOLD
79 ms
Trigger Hysteresis
TRIG:HYST
3 dB