Rohde & Schwarz R&S NRP - Page 313

Remote Control - Commands R&S NRP
1144.1400.12 6.138 E-3
"TD-SCDMA "
Sensor parameter Remote control command in short form Value
Sensor Mode
SENS:FUNC "POW:XTIM"
Integration Time
SENS:APER
5 ms
Duty Cycle
SENS:DCYC
13.250 %
Duty Cycle Correction
SENS:DCYC:STAT ON
Smoothing
SENS:SMO OFF
Timegate Offset
SENS:TGAT:OFFS:TIME
1: 20 µs
2: 710 µs
3: 835 µs
4: 5.970 ms
Timegate Time
SENS:TGAT:TIME
1: 620 µs
2: 30 µs
3: 85 µs
4: 620 µs
Scope Offset Time
SENS:TRAC:OFFS:TIME
-200 µs
Scope Capture Time
SENS:TRAC:TIME
10.250 ms
Scope Number Of Points
SENS:TRAC:POIN
312
Scope Realtime
SENS:TRAC:REAL OFF
Trigger Delay
TRIG:DEL
0 s
Trigger Level
TRIG:LEV
-30 dBm
Trigger Source
TRIG:SOUR INT
Trigger Slope
TRIG:SLOP POS
Trigger Holdoff
TRIG:HOLD
19.9 ms
Trigger Hysteresis
TRIG:HYST
3 dB