R&S NRP Maintenance
1144.1400.12 8.1 E-1
8 Maintenance
Under normal operating conditions the R&S NRP does not require any regular maintenance except for
occasional cleaning of the front panel.
Sensor test
The sensor selftest is described in Chapter 4 in the section "Selftest".
Instrument selftest
The R&S NRP carries out a selftest during booting. This selftest is described in Chapter 1 in the section
titled "Welcome screen and function test".
Cleaning the exterior
To clean the exterior, use a soft, lintfree cloth and an alcohol-free solvent, e.g. a commercially available
dishwashing liquid.
Storage
The R&S NRP has a storage temperature range of –20 °C to +70 °C.
To Next Page
Loading...
