SCPI Error Messages R&S NRP
1144.1400.12 9.2 E-2
Error code Error text returned upon queue query
Explanations
-112 Program mnemonic too long
The header contains more than 12 characters.
-113 Undefined header
The header is not defined for the device.
-114 Header suffix out of range
The header contains an illegal numeric suffix.
-120 Numeric data error
The command contains a faulty numeric parameter.
-121 Invalid character in number
A numeric contains an invalid character.
-123 Exponent too large
The magnitude of the exponent is larger than 32000.
-124 Too many digits
The numeric contains too many digits.
-127 Invalid numeric data
-128 Numeric data not allowed
The command contains a numeric data element in a position where it is not accepted.
-131 Invalid suffix
The suffix is invalid for this device. The suffix is the index that indexes the sensor with the SENSe commands (1-
4), the CALCulate block with the high-level measurement commands (1-4) and the window with the DISPlay
commands (1-4).
-134 Suffix too long
The suffix contains more than 12 characters.
-138 Suffix not allowed
A suffix is not allowed for this command or at this position in the command.
-141 Invalid character data
Either the character data element contains an invalid character or the particular element received is not valid for
this command.
-144 Character data too long
The character data element contains too many characters.
-148 Character data not allowed
The character data element used is not allowed for this command or at this position of the command.
-151 Invalid string data
The command contains invalid string data.
-158 String data not allowed
The command contains a valid string data element at a position where it is not allowed.
-161 Invalid block data
The command contains invalid block data.
-168 Block data not allowed
The command contains a legal block data element at a point where it is not allowed.
To Next Page
Loading...
