Rohde & Schwarz R&S NRP - Page 45

Measuring average power (Cont Av mode) R&S NRP
1144.1400.12 2.4 E-2
Frequency – ( )
* *
¾ Press the Frequency softkey
A panel with all the characters you will need to enter the
frequency is displayed next to the softkeys.
1 2 3 4 5 6 7 8 9 0 U . – ( )
* *
¾ Clear the field with the (DEL/1TRIG) key.
¾ Enter the frequency of the signal that is fed in by
pressing the appropriate softkeys.
¾ Using the UNIT softkey, select the unit you want.
9 Try the following:
To familiarize yourself with the editor, try the following
steps:
¾ Using the left/right cursor keys, move the block cur-
sor and overwrite the digits with new values.
¾ Use the up/down cursor keys to scroll the digits to the
cursor position.
¾ Move the insertion mark to the right onto the units.
Use the vertical up/down keys to change the unit.
(¶ MENU)
*
¾ Confirm your entry.
(¶ MENU)
*
¾ Close the dialog box.