R&S NRP Supplement
1144.1400.12-04- Supplement 1 E-1
Supplement to Operating Manual R&S NRP
1144.1400.12-04-
Dear Customer,
Your power meter is equipped with firmware version ≥ 03.00. A number of functions have been modified
since the printing of the manual, and the modifications are described on the following pages.
Ethernet
For remote control via a TCP/IP-based LAN, the R&S NRP can be fitted with an optional 10/100BaseT
Ethernet interface (option R&S NRP-B4). The socket is located on the rear panel of the R&S NRP. Via
this interface, a controller can remote-control the R&S NRP by means of the power meter's SCPI
commands, using the VXI11 protocol (TCP/IP instrument protocol specification), version 1.0, released
on 17 July 1995 by the VXIbus Consortium.
Ethernet connection socket
To Next Page
Loading...
