R&S NRP Data acquisition and parameters (Sensor menu)
1144.1400.12 4.17 E-2
Edit Table… – ( )
ä ä
Opens a dialog box for editing the selected offset correction table.
Remote Control
MEMory:TABLe:FREQuency[?] <NRf>{,<NRf>}
MEMory:TABLe:GAIN[:MAGNitude][?] <NRf>{,<NRf>}
S Parameter –
( )
Device
ä ä
Activates the S-parameter set stored in the sensor for a twoport that
has been connected ahead of the sensor.
Remote Control
[SENSe[1..4]]:CORRection:SPDevice:STATe[?] ON | OFF
To Next Page
Loading...
