Roland AE-30 - Scene;Control Rx; Scene;Ifx

27
Scene Parameters
Parameter Value Explanation
Velocity
These parameters set the note-on velocity values.
REAL The velocity value is determined by the strength of your tonguing.
FIXED The specied value (a xed value) is used.
Fixed Velocity 1–127 This sets the velocity value used for the “FIXED” velocity setting.
SCENE/CONTROL RX
Parameter Value Explanation
Rx S1, Rx S2 OFF, ON Sets whether to receive [S1] and [S2] button operations (ON) or not (OFF).
Rx X, Rx C1–5, Rx Tc,
Rx Ta
OFF, ON Sets whether to receive side key button operations (ON) or not (OFF).
Rx Breath OFF, ON Sets whether to receive breath controller operations (ON) or not (OFF).
Rx Bite Down
Rx Bite Up
OFF, ON Sets whether to receive bite controller operations (ON) or not (OFF).
Rx Thumb Lever Down
Rx Thumb Lever Up
OFF, ON Sets whether to receive thumb lever operations (ON) or not (OFF).
Rx Thumb Pad OFF, ON Sets whether to receive thumb pad operations (ON) or not (OFF).
Rx Motion OFF, ON Sets whether to receive motion controller operations (ON) or not (OFF).
SCENE/IFX
Parameter Value Explanation
IFX SW OFF, ON Switches the IFX on/o.
IFX Type
See “MFX/IFX Parameters”
(p. 50)
Selects the IFX type.
FX
IFX parameters
See “MFX/IFX Parameters”
(p. 50)
Congure the parameters for the selected IFX.
The available parameters dier depending on the type of the eects you selected
in IFX Type.
SEND
Chorus Send Level 0–127
Sets the amount of chorus.
If you don’t want to add the chorus eect, set it to 0.
Reverb Send Level 0–127
Sets the amount of reverb.
If you don’t want to add the reverb eect, set it to 0.
Delay Send Level 0–127
Sets the amount of delay.
If you don’t want to add the delay eect, set it to 0.