Roland AE-30 Parameter Guide

15
Data Backup and Restore Operations
Restore
1. Hold down [MENU] button and turn on the power.
Continue to hold down the [MENU] button until the Roland logo
disappears.
2. Connect the USB ash drive containing the backed-up
data to the USB port on the unit.
3. Press the [C] [A] buttons to select “System Restore,” and
press the [MENU] button.
4. Press the [A] button to select “YES.” If you decide to
cancel, press the [C] button to select “NO.”
5. Press the [C] [A] buttons to select the backed-up le,
and press the [MENU] button.
A conrmation screen appears.
6. To execute the restore operation, press the [A] button to
select “YES.” If you decide to cancel, press the [C] button
to select “NO.”
“Writing...” is displayed on the screen and the restore operation is
executed. When the operation is nished, “Complete” appears and
then the display returns to the System Restore screen.
* If les could not be read in correctly, “Read Error” is displayed. Verify
the connection of the USB ash drive, then carry out the restore
operation again. Also, if the backed-up data of the scene setting is
selected at “System Restore,” “Read Error” is displayed.
7. Turn o the power and disconnect the USB ash drive.
Backing Up/Restoring Scene Settings
Backup
1. Hold down [MENU] button and turn on the power.
Continue to hold down the [MENU] button until the Roland logo
disappears.
2. Connect the USB ash drive to the USB port on the unit.
3. Press the [C] [A] buttons to select “Scene Backup,” and
press the [MENU] button.
4. Press the [A] button to select “YES.” If you decide to
cancel, press the [C] button to select “NO.”
5. Enter the le name.
Press the [C] [A] buttons to move the cursor, then press [=] [?]
buttons to input the characters. Use [S1] button to insert one
character and [S2] button to delete it.
6. Press the [MENU] button.
“Write OK ?” is displayed on the screen.
7. To execute the backup operation, press the [A] button to
select “YES.” If you decide to cancel, press the [C] button
to select “NO.”
“Writing...” is displayed on the screen and the backup operation is
executed. When the operation is nished, “Complete” appears and
then the display returns to the Scene Backup screen.
8. Turn o the power and disconnect the USB ash drive.

Roland AE-30 Specifications

General

Brand	Roland
Model	AE-30
Category	Recording Equipment
Language	English