Roland AE-30 Parameter Guide

3
Settings Used on this Instrument
System Parameters
Indication (Parameter)
Value Explanation
Master Tuning
415.3–466.2 (Hz)
Changes the system tuning.
* The displayed value is the frequency of the A key.
Transpose Mode
Switches the operating mode for transpose.
System
Turn the [TRANSPOSE] knob to transpose the sound in that amount.
The transposition does not change even when you select a scene.
Scene
The transposition will be as specied by the scene.
* The value indicated by the [TRANSPOSE] knob might be dierent than the actual
transposition.
* Even if transposition is specied for the scene, turning the [TRANSPOSE] knob sets the
transposition to the value of the knob.
Transpose Knob Mode
These parameters congure the functions for the [TRANSPOSE] knob.
System Transpose Species that the [TRANSPOSE] knob is used for the transpose function.
Speaker Volume Species that the [TRANSPOSE] knob is used for adjusting the volume of the built-in speakers.
Output Volume
Species that the [TRANSPOSE] knob is used for adjusting the volume for headphones
connected to the PHONES jack, or of the signal output from the OUTPUT jack.
Speaker & Output
Species that the [TRANSPOSE] knob is used for simultaneously adjusting the volume of
the built-in speakers and of headphones connected to the PHONES jack, as well as the
signal output from the OUTPUT jack.
System Tranpose
-5 (G)–0 (C)–+6 (F#)
Sets the system transpose value.
Display Contrast
1–5
Sets the display contrast.
Larger values make the display brighter.
Display O Time
Always On, 3sec, 10sec,
30sec, 1–3min
Sets the time it takes for the display to turn o when the instrument is not being used.
When set to “Always On,” the display is always on.
When you press the [SCENE] or [MENU] button while the display is o, the display turns
back on.
Auto O
Always On, 5min, 30min
Sets the time before the instrument automatically turns o.
The power to this unit will be turned o automatically after a predetermined amount of
time has passed since it was last used for playing music, or its buttons or controls were
operated (Auto O function).
If you don’t want the unit to turn o automatically, change this setting to “Always On.”
Speaker Volume
0–11 Sets the volume of the built-in speakers.
Output Volume
0–11
Species the volume that is output from the OUTPUT jack or from headphones connected
to the PHONES jack.
Speaker Setting
These parameters are the speaker settings.
O Sound is not output from the built-in speakers.
On Sound is output from the built-in speakers.
Auto
Sound is not output from the built-in speakers if headphones or a cable are connected to
the PHONES jack.
Output Mode
Stereo, Mono
Sets whether the audio signal output from the PHONES or OUTPUT jack is outputted in
stereo or in mono.
Hold Mode
Sets the “hold mode,” which sustains notes even after you stop blowing.
O Notes are not sustained.
Breath
Notes are sustained at the volume they are played when you blow once.
Inhale to stop the note.
Key Pressing the performance keys produce notes according to your ngering.
Breath Curve
Species how the sound responds to the force of your breath (breath sensitivity).
L5–L1
We recommend these settings if you’re a beginning wind
instrument player.
Fortissimo () can be produced even by blowing relatively
softly.
Breath force
Level
M
H1
H5
L1
L5
M
This is the usual setting.
H1–H5
We recommend these settings for experienced wind
instrument players.
Fortissimo () is produced only when you blow quite strongly.

Roland AE-30 Specifications

General

Brand	Roland
Model	AE-30
Category	Recording Equipment
Language	English