Roland AE-30 - Mod Delay (Modulation Delay); 3 Tap Pan Dly (3 Tap Pan Delay)

59
MFX/IFX Parameters
38 Mod Delay
(Modulation Delay)
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R out
L out
2-Band EQ
2-Band EQ
Balance W
Balance W
Feedback
Feedback
Balance D
Balance D
L in
Delay Modulation
Delay Modulation
R in
When Feedback Mode is CROSS:
R out
L out
2-Band EQ
2-Band EQ
Balance W
Feedback
Feedback
Balance D
Balance D
L in
Delay Modulation
Delay Modulation
R in
Balance W
Parameter Value Explanation
Delay L (sync sw) OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Scene Tempo” (p. 22)
Delay L (msec) 1–1300 (msec)
Adjusts the time until the left delay sound
is heard.
Delay L (note)
Note
& “Note” (p. 64)
Delay R (sync sw) OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Scene Tempo” (p. 22)
Delay R (msec) 1–1300 (msec)
Adjusts the time until the right delay
sound is heard.
Delay R (note)
Note
& “Note” (p. 64)
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound is
fed back into the effect. (See the figures
above.)
Feedback -98–+98 (%)
Adjusts the proportion of the delay sound
that is fed back into the effect. Negative
(-) settings will invert the phase.
HF Damp
200, 250, 315, 400,
500, 630, 800, 1000,
1250, 1600, 2000,
2500, 3150, 4000,
5000, 6300, 8000,
BYPASS (Hz)
Adjusts the frequency above which the
delay sound fed back to the effect is
filtered out (BYPASS: no cut).
Rate (sync sw) OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Scene Tempo” (p. 22)
Rate (Hz) 0.05–10.00 (Hz)
Frequency of modulation
Rate (note)
Note
& “Note” (p. 64)
Depth 0–127 Depth of modulation
Phase 0–180 (deg) Spatial spread of the sound
Low Gain -15–+15 (dB) Gain of the low range
High Gain -15–+15 (dB) Gain of the high range
Balance D100:0W–D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
39 3Tap Pan Dly
(3 Tap Pan Delay)
Produces three delay sounds; center, left and right.
R out
L out
2-Band EQ
2-Band EQ
Balance W
Center Tap
Balance W
Feedback
Balance D
Balance D
L in
Triple Tap
Delay
R in
Left Tap
Right Tap
Parameter Value Explanation
Delay L (sync sw) OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Scene Tempo” (p. 22)
Delay L (msec) 1–2600 (msec)
Adjusts the time until the left delay sound
is heard.
Delay L (note)
Note
& “Note” (p. 64)
Delay R (sync sw) OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Scene Tempo” (p. 22)
Delay R (msec) 1–2600 (msec)
Adjusts the time until the right delay
sound is heard.
Delay R (note)
Note
& “Note” (p. 64)
Delay C (sync sw) OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Scene Tempo” (p. 22)
Delay C (msec) 1–2600 (msec)
Adjusts the time until the center delay
sound is heard.
Delay C (note)
Note
& “Note” (p. 64)
Center Feedback -98–+98 (%)
Adjusts the proportion of the delay sound
that is fed back into the effect. Negative
(-) settings will invert the phase.
HF Damp
200, 250, 315, 400,
500, 630, 800, 1000,
1250, 1600, 2000,
2500, 3150, 4000,
5000, 6300, 8000,
BYPASS (Hz)
Adjusts the frequency above which the
delay sound fed back to the effect is
filtered out (BYPASS: no cut).
Left Level 0–127
Volume of each delay soundRight Level 0–127
Center Level 0–127
Low Gain -15–+15 (dB) Gain of the low range
High Gain -15–+15 (dB) Gain of the high range
Balance D100:0W–D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level