Roland AE-30 - Scene;Delay; Delay Parameters

29
Scene Parameters
SCENE/DELAY
Parameter Value Explanation
DLY SW
OFF, ON Switches the delay on/o.
Delay Type
Selects the types of delay.
OFF, 1 Delay, 2 T-Ctrl Dly, 3 Delay0Trem, 4 2Tap PanDly, 5 3Tap PanDly
FX
Delay parameters
Congure the parameters of the selected delay type.
See “Delay parameters”
The available parameters dier depending on the type of delay you selected in
Delay Type.
OUTPUT
Delay Level
0–127
Sets the amount of delay.
If you don’t want to add the delay eect, set it to 0.
Reverb Send Level
0–127
Sets the amount of reverb.
If you don’t want to add the reverb eect, set it to 0.
Delay Parameters
1 Delay
This is a stereo delay.
Parameter Value Explanation
Delay Time
(sync sw)
OFF, ON
If this is “ON,” the delay
synchronizes with the tempo.
Delay Time
(msec)
1–1300
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Delay Time
(note)
Note (*1)
Feedback -98–+98 (%)
Adjusts the proportion of the
delay sound that is fed back into
the eect. Negative (-) settings
will invert the phase.
HF Damp (*2)
Adjusts the frequency above
which the delay sound fed
back to the eect is ltered out
(BYPASS: no cut).
2 T-Ctrl Dly (Time Control Delay)
A stereo delay in which the delay time can be varied smoothly.
Parameter Value Explanation
Delay Time
(sync sw)
OFF, ON
If this is “ON,” the delay
synchronizes with the tempo.
Delay Time
(msec)
1–1300
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Delay Time
(note)
Note (*1)
Acceleration 0–15
When you change the delay time,
this species the time over which
the current delay time changes to
the specied delay time.
This aects the speed of pitch
change as well as the delay time.
Feedback -98–+98 (%)
Adjusts the proportion of the
delay sound that is fed back into
the eect. Negative (-) settings
will invert the phase.
HF Damp (*2)
Adjusts the frequency above
which the delay sound fed
back to the eect is ltered out
(BYPASS: no cut).