Roland JP-8080 - Types of Factory Reset

141
Types of Factory Reset
● Data which will be returned to the factory
settings
ALL: All user performances, user patches, user patterns,
user motions, and system settings (all parameters set by
[MIDI] and [SETUP] (p.122–126))
PERF ALL: All user performances
PATCH ALL: All user patches
PTN ALL: All user patterns
PTN C#2-C4: user patterns C#2–C4
PTN C#4-C6: user patterns C#4–C6
PTN CURRENT: the currently selected user pattern (the
pattern of previously pressed key)
MOTION ALL: all user motions
MOTION A1: user motion [1] of SET A
MOTION A2: user motion [2] of SET A
MOTION B1: user motion [1] of SET B
MOTION B2: user motion [2] of SET B
SYS SETUP: system settings (all parameters set by [MIDI]
and [SETUP] (p.122–126))
● Resetting to JP-8000 sounds
JP8000PATCH: All user patches will be set to JP-8000 pre-
set patches.
JP8000PAT.A: All user patches A will be set to JP-8000 pre-
set patches A.
JP8000PAT.B: All user patches B will be set to JP-8000 pre-
set patches B.
JP8000 PERF: All user performances will be set to JP-8000
preset performances.
JP8000 ALL: All user performances, user patches, motions,
and system settings will be set to JP-8000 preset perfor-
mances, preset patches, motions, and system settings.
* If you execute the factory reset operation with “JP8000
ALL,“ the MIDI Thru settings (a parameter not found on
the JP-8000) will be turned OFF.
Returning Only a Specific User Performance
or User Patch to the Factory Settings
The factory-set user performances and user patches contain
the same performance and patch settings as Preset 2.
If you wish to return only a specific User Performance or
User Patch to the factory setting, use the following proce-
dure.
1 Select the Preset 2 performance/patch of the same
number as the user performance / user patch that
you wish to return to the factory settings.
2 Save the settings in the user performance / user
patch of the same number.
Chapter
11