Roland JP-8080 - Adjusting the Volume of each Frequency Range to Create a New Sound (Filter Bank); Producing Arpeggios When Chords Are Played (Arpeggiator)

36
■ Adjusting the Volume of Each Frequency Range to Create a New Sound (Filter Bank) •••
You can create new sounds by passing a sound through the twelve filters and adjusting the volume for
frequency range. The twelve filters are collectively called a “filter bank.”
1 Select performance P2: 82 (p.23).
The PANEL SELECT [UPPER] and [LOWER] indicators will blink.
2 Try moving sliders 1–12.
The frequencies will rise in the order of 1–12.
Raising a slider will increase the volume at that frequency range.
Lowering a slider all the way to the bottom will cause the volume of that frequency range to be zero.
* While the [UPPER] and [LOWER] indicators are blinking, the PITCH ENVELOPE, FILTER ENVELOPE
and AMP ENVELOPE sliders will control the volume of the twelve filters.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
◆ To learn more about the filter bank
➜ “Chapter 8. Using Voice Modulator” (p.103)
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Producing Arpeggios when Chords are Played (Arpeggiator)
The JP-8080 allows you to automatically play an arpeggio (broken chord) simply by holding down two or
more notes.
2
5
2
3,8
6,7