Roland JP-8080 - Adjusting the High and Low Tone (Tone Control)

30
◆ Rotate the AMP section [LFO1 DEPTH] toward the right, and the volume will change cyclically.
➜ “Modifying the Volume” (p.76)
◆ For details on the settings of the LFO 1 section
➜ “Modulating the Sound (LFO 1)” (p.77)
◆ You can also add modulation at the desired timing while you play.
➜ “Adding Cyclic Change (MODULATION (LFO 2))” (p.87)
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Adjusting the High and Low Tone (Tone Control)
The Tone Control knobs are used to adjust the low/high frequency ranges of the sound, so that the tonal
quality is to your taste. Let’s use the Tone Control knobs to emphasize the low range.
1 Select the Performance P1: 88 (p.23).
By playing the MIDI keyboard, you will hear the Upper Patch sound. Let’s modify this sound.
2 Rotate the TONE CONTROL [BASS] knob.
Rotating the knob toward the right will emphasize the low range, producing a solid sound.
3 Rotate the TONE CONTROL [TREBLE] knob.
If you also rotate [TREBLE] toward the right in the same way to emphasize the high range, the sound will
have both a solid bottom and a crisp top.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
◆ For details on the settings of the TONE CONTROL
➜ “Adjusting the High and Low Tone (Tone Control)” (p.78)
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Broadening the Sound (Multi Effects Level)
The JP-8080 provides 13 types of effects, and these can be assigned to [MULTI-FX LEVEL] and used.
For this example, let’s select a performance to which “chorus” is assigned, and try modifying the sound.
By using Chorus, even single notes can be given a broad and spacious sound that is characteristic of mul-
tiple sounds occurring at once.
2 3
2