SAFETY DECALS
If your machine is repainted, it is extremely important
that you replace all the CAUTION, WARNING and
DANGER safety decals in the proper locations. (Figure
1-1) For additional help, refer to the parts listing in
Section 7 and contact your authorized Rosco LeeBoy
dealer to order a replacement kit.
NOTE: It is the responsibility of the owner and
operator to make sure that all safety labels are
readable and located on the chip spreader as
designated by Rosco LeeBoy.
Figure 1-1. Safety Labels and Safety Label Locations
Safety
Rosco CSV Variable Width Chip Spreader1-10
To Next Page
Loading...