Reverse Camera System
A reverse camera system is also available for the CSV
Variable Width Chip Spreader. (Figure 4-43) This
additional safety feature assists operators when moving
in reverse by using the rear camera to see directly
behind the truck.
Figure 4-43. Back-Up Camera
This unobtrusive sensor/camera system features a 4.3-
inch LCD color monitor integrated into a rearview mirror
that integrates four ultrasonic sensors with the camera
image. The system provides both audible and visual
obstacle warning. The high-resolution monitor and
ush-mount camera system delivers excellent picture
quality.
Spread Hopper Vibrator
A spread roll vibrator option is available to further
promote aggregate ow, but it is a must when chip
spreading with sand. (Figure 4-44) This option
enhances the chip spreader’s ability to move any
bridged or trapped aggregate through the spread
hopper using increased agitation.
Figure 4-44. Vibrator Option
Operation
Rosco CSV Variable Width Chip Spreader4-26
To Next Page
Loading...
General