Rosco CSV - Specification Charts

SPECIFICATION CHARTS
The specications provided in this section include
screed weights, dimensions, performance, and torque
values for both metric and standard inch fastener.
13’
(4 m)
26’
(8 m)
10’ 8”
(3.3 m)
6’ 4.5”
(2 m)
10’
(3.04 m)
Table 2-1. Machine Dimensions
ITEM SPECIFICATION
Overall Length 26 ft (8 m)
Overall Height with Beacon Extended 10 ft 8 in (3.3 m)
Overall Width (Outside Front Tires) 8 ft 6 in (2.6 m)
Overall Weight 23,720 lbs (10759 kg)
Wheelbase 13 ft (3.9 m)
Outside Turning Radius 20 ft 6 in (6.2 m)
Minimum Ground Clearance 7 in (18 cm)
Track Width (Front) 6 ft 4.5 in (2 m)
Track Width (Rear) 7 ft 7 in (2.3 m)
Table 2-2. Engine Specications
ITEM SPECIFICATION
Model Cummins QSB6.7, Tier 4F
Engine Type 6-Cylinder, Water-Cooled Diesel
Horsepower 275 HP
Rated Speed 2200 RPMs
Displacement, Bore and Stroke 402 cu in (6.7 L); 4.10 in (105 mm); 5 in (127 mm)
High Idle Speed 900 RPMs
Maximum Gross Torque 730 ft lbs
Replace original equipment only with
components approved by Rosco LeeBoy.
Rosco CSV Variable Width Chip Spreader
2-4
Information and Specications