Rosco CSV - Page 31

Table 2-3. Electrical Specications
ITEM SPECIFICATION
Batteries (2) 12 Vdc Maintenance Free
Cold Cranking Amps (CCA) 1000 CCA
Alternator 130 amp
Table 2-5. Operational Specications
Work Speed / Travel Speed 8 mph (12.8 kph) / 20 mph (32.2 kph)
Conveyor Belt Speed (Maximum) 500 FPM
Minimum / Maximum Spread Width 1 - 16 ft (.3 - 4.9 m)
Gradeability Percentage 9% Fully Loaded
Table 2-6. System Pressures
ITEM SPECIFICATION
Drive 5800 psi (399.9 Bar)
Propulsion Motor Displacement 160 cc (.16 L)
Propulsion Pump Displacement and Relief Pressure 165 cc (.16 L); 5800 psi (399.9 Bar)
Hydraulic Cooler Electric 11,000 btu/hr (3.2 kW/hr)
Auxiliary Pump Displacement and Relief Pressure 130 cc (130 ml); 2500 psi (172.4 Bar)
Standby Pressure 350 psi (24.1 Bar)
Table 2-7. Fuel and Lubricant Specications
ITEM SPECIFICATION
Engine Oil 15W-40
Hydraulic Oil 5W20 AWAT OIL
Coolant Ethylene/Glycol or Propylene Glycol
Fuel Ultra Low Sulphur Diesel (ULSD)
Transfer Case (2-Speed) 90 WT Motor Oil
Differential Oil 90 WT Motor Oil
Gear Box 90 WT Motor Oil
Grease Shell Avania EP Grease or Equivalent
Table 2-8. Machine System Capacity Specications
ITEM SPECIFICATION
Fuel 50 gal (189 L)
Engine Lubrication Oil 17.6 qt (16.6 L)
Engine Coolant 32 qt (30.3 L)
Hydraulic Oil Reservoir 75 gal (283.9 L)
2
Rosco CSV Variable Width Chip Spreader
2-5
Information and Specications