Rosco CSV User Manual

250-Hour or Quarterly Routine
Maintenance
1. Perform previous maintenance procedures.
2. Change engine oil and replace oil lter. (Page 5-13)
3. Replace fuel lter. (Page 5-17)
4. Adjust conveyor belt, wipers and chute liners.
(Page 5-10)
5. Adjust auger and spreadroll chains, spreadroll
seal, and spreadroll wearplates. Adjust if needed.
(Pages 5-10 to 5-12)
6. Check for damaged, loose, or missing decals.
Replace decals as required.
7. Check axle drive gear oil. Add more if needed.
(Page 5-8)
8. Check planetary hub uid level. Add more if needed.
(Page 5-7)
9. Replace air lter. (Page 5-14)
10. Replace radiator coolant. (Page 5-14)
11. Perform any other engine preventative maintenance
as described in the Engine Operator’s Manual.
500-Hour or Semi-Annual
Routine Maintenance
1. Perform previous maintenance procedures.
2. Change planetary hub gear oil. (Page 5-7)
3. Change drive axle oil. (Page 5-8)
4. Change hydraulic oil and replace charge lter.
(Page 5-22)
5. Service battery. (Page 5-19)
6. Adjust brakes. (Page 5-24)
7. Perform any other engine preventative maintenance
as described in the Engine Operator’s Manual.
1000-Hour or Annual Routine
Maintenance
1. Perform previous maintenance procedures.
2. Perform the 1000-hour preventative maintenance as
described in the Engine Operator’s Manual.
2000-Hour or Every Two Years
Maintenance
1. Inspect the Diesel Exhaust Fluid (DEF) lter. Clean
or replace if needed. (Page 5-16)
2. Perform any other engine preventative maintenance
as described in the Engine Operator’s Manual.
3000-Hour or Every Three Years
Maintenance
1. Inspect the DEF Dosing Unit Filter. Clean or replace
if needed. (Page 5-16)
2. Perform any other engine preventative maintenance
as described in the Engine Operator’s Manual.
5
Maintenance
Rosco CSV Variable Width Chip Spreader 5-5

Rosco CSV Specifications

General

Brand	Rosco
Model	CSV
Category	Spreader
Language	English