Main Screen
This screen shows the operator current ground
speed (engine RPMs), PSY (pounds per square yard),
component status, FPMs (feet per minute) spreading
speed, and various mechanical status icons. Pressing
the buttons allow the operator to navigate to other
screens to set PSY, spreading speed, engine RPMs and
other functions. (Figure 4-9)
1
2
3
4
5
6
7
8 9 10
Figure 4-9. Main Screen Buttons
1 - Increase PSY
2 - Decrease PSY
3 - Increase FPM
4 - Decrease FPM
5 - Memory Scroll (Next)
6 - Memory Scroll (Previous)
7 - Settings Screen
8 - Transducer Screen
9 - Decrease RPMs
10 - Increase RPMs
PSY Buttons: Pressing Button 1 allows operator to
increase the PSY while pressing Button 2 decreases
PSY setting. (Figure 4-9) The PSY rate set will show
on the screen. (Figure 4-10)
FPMs: Pressing Button 3 allows operator to increase
FPM while pressing Button 4 decreases FPM setting.
(Figure 4-9) The FPM rate set will show on the screen.
(Figure 4-10)
Memory Scroll: This only functions while operating in
the AUTO mode. Pressing Button 5 scrolls to view the
next memory setting while pressing Button 6 scrolls to
view the previous memory setting saved in the Memory
screen function. (Page 4-11)
To activate the control console:
1. Press the Settings button. (Figure 4-7) This
accesses the Settings screen. (Figure 4-8)
2
Figure 4-8. Settings Screen
2. The same button on the Settings Screen displays
“Console Inactive.” Pressing this button again
activates the console.
The Main screen will show “Console Active” or “Console
Inactive in the lower right corner.
The nonactive console still offers limited chip spreader
functionality for the benet of a second operator,
depending upon whether operating in the manual or
AUTO mode. (If equipped with the optional reverse
camera system, it functions regardless of operational
mode.)
Inactive control console functions are:
Manual Mode:
• Conveyor Speed
• Auger Speed
• Spread Hopper Gate Control
• Spread Hopper Extend/Retract
• Truck Hitch
Auto Mode:
• Hopper Extend/Retract
• Truck Hitch
• Gate Control
Operation
Rosco CSV Variable Width Chip Spreader4-8