Rosco CSV - Transducer Screen (Option); Memory Screen

Status Icon Description
W
Warning - Warns operator there is a condition with the ECM (Engine Control Module).
P
Protect - Noties operator the ECM has gone into protect mode. Engine shuts down to protect itself
from damage.
P
S
Stop - If this icon illuminates red, STOP THE MACHINE IMMEDIATELY. A serious situation exists
that could cause engine or component damage if the operator continues operating the machine.
Transducer Screen (Option)
The optional transducer component tracks motor
over-speed and include check points for all direct
driven outputs along with inputs and joystick position
monitoring. The transducer screen displays the current
system pressure levels for propel, steering/brake
functions, charge, auxiliary systems and voltage of the
various position sensors on the main and extension gate
cylinders. (Figure 4-11)
Figure 4-11. Transducer Screen
Memory Screen
The Memory screen allows the operator to enter, save
and modify settings into the system’s memory. (Figure
4-12) Pressing the left arrow button saves the settings
entered and navigates back to the Main screen.
1
2
3
4
5
6
7
Figure 4-12. Memory Screen
1 - Memory Scroll Up
2 - Memory Scroll Down
3 - Rock Size Increase
4 - Rock Size Decrease
5 - Rock Type
6 - PSY Increase
7 - PSY Decrease
4
Operation
Rosco CSV Variable Width Chip Spreader 4-11