OPERATOR STATION
1
2
3
4
5
6
Figure 3-2. Operator Station(s)
ITEM
NO.
CONTROL NAME FUNCTION
1 Foot Brake Pedal Depressing the foot brake pedal stops the machine.
2 Steering Wheel with Horn
Steers the machine. Includes horn and turn signal indicator lever.
It is recommended that the operator always sound the horn before starting
the engine to alert others that this large industrial machine is about to start
moving.
3 Joystick Controls
The joystick is an added convenience for the operator to control the
receiving hopper wings and truck hitch while spreading. A single button
on the back side of the joystick engages the spread hopper to release the
aggregate onto the road surface.
4 Control Panel
Contains machine and chip spreading controls, and the DP710 Digital Display
control unit. (Pages 3-8 and 3-9)
5
Extending/Retracting
Operator Station Platform
Operator station platform hydraulically extends and retracts 15 inches (38.1
cm), providing an unrestricted view for accurate chip spreading.
6
Operator Station Access
Ladder
Provides access to the operator station. The operator station is located on
the left side of the machine. Dual operator stations is an additional option.
3
Components
3-7Rosco CSV Variable Width Chip Spreader
To Next Page
Loading...