Rosco CSV - Control Panel and Joystick Functions

CONTROL PANEL
1
14 15 16 17 18
19
20
4
5
6
7
8
9
10
11
3
12
13
2
Figure 3-3. Control Panel
ITEM
NO.
CONTROL NAME FUNCTION
1 DP710 Digital Display
Digital display for operational and engine monitoring functions (i.e., oil
pressure, voltage, fuel level), system faults, and manual/automatic mode for
machine components. (See Page 4-7)
2 Joystick
The joystick is an added convenience for the operator for controlling the
receiving hopper, truck hitch position and spreading aggregate. (Page 3-10)
3 Park Brake Always set the park brake when the machine is parked.
4 Left Auger Manual/Auto
Sets the left spread hopper auger to operate either automatically or in
manual mode.
5 Left Auger Speed
Sets the left auger speed when the auger is set to the manual mode. The
operator can choose from three (3) speed options (the button will illuminate
red, amber or green): 60 RPMs (red); 120 RPMs (amber); or 180 RPMs
(green).
6 Left Conveyor Manual/Auto Sets the left conveyor to operate either automatically or in manual mode.
7 Left Conveyor Speed
Sets the left conveyor speed when the conveyor is set to the manual
mode. The operator can choose from ve (5) speed options (the button will
illuminate colors accordingly): 70 RPMs (red); 105 RPMs (amber); 140 RPMs
(pink); 185 RPMs (blue); or 230 RPMs (green).
8 Right Auger Manual/Auto
Sets the right spread hopper auger to operate either automatically or in
manual mode.
9 Right Auger Speed
Sets the right auger speed when the auger is set to the manual mode. The
operator can choose from three (3) speed options (the button will illuminate
red, amber or green): 60 RPMs (red); 120 RPMs (amber); or 180 RPMs
(green).
Components
Rosco CSV Variable Width Chip Spreader3-8