Rotax 912 i series Service Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
ABBREVIATIONS AND TERMS
Abbreviations Description
* Reference to another section
@
center of gravity
The drop symbol indicates use of sealing agents, adhesives or lubri-
cants (only in the Illustrated Parts Catalog).
°C Degrees Celsius (Centigrade)
°F
Degrees Fahrenheit
rpm
Revolutions per minute
A Ampere
AAPTS Ambient Air Pressure Temperature Sensor
AC
alternating current
AD Airworthiness Directives
Ah Ampere hour
A/C Aircraft
AR as required
assy.
assembly
ASB Alert Service Bulletin
ACG Austro Control GmbH
ACL Anti Collision Light
API American Petrol Institute
ASTM American Society for Testing and Materials
ATA Air Transport Association
AWG American Wire Gauge
CAN Controller Area Network
Coil 1–4
Ignition coils 1–4
CPS 1+2 Crankshaft Position Sensor 1+2
CSA Constant Speed Actuator
CTS Cooling Temperature Sensor
CW
clockwise
CCW
counter-clockwise
CGSB Canadian General Standards Board
Effectivity: 912 i Series
Edition 2/Rev. 0
00–00–00
Page 5
September 01/2018

Rotax 912 i series Specifications

General

Number of Cylinders	4
Max Power	100 hp (73.5 kW)
Max Power Output RPM	5800 rpm
Ignition System	Dual electronic ignition
Oil System	Dry sump, forced lubrication with separate oil tank
Reduction Gear Ratio	2.43:1
TBO	2000 hours
Engine Type	4-stroke, horizontally opposed
Displacement	1352 cm³
Bore x Stroke	84 mm x 61 mm
Max Torque	128 Nm
Fuel Type	Avgas 100LL or unleaded automotive gasoline
Fuel System	Electronic fuel injection
Cooling System	Liquid/air-cooled