BRP-Rotax
MAINTENANCE MANUAL LINE
INSTALLATION OF SPARK PLUG
Figure 7.27: Spark plugs
1 Ground electrode 2 Head area
Cleaning
m WARNING
Eyes and skin irritation!
Rinse off with water in the case of contact with eyes or skin. May be harmful if
swallowed.
Before every installation, the spark plug thread and the spark plug seat at the cylinder
head should be cleaned (e.g. to remove residue of heat conduction compound).
12–20–00
Page 50
September 01/2018
Effectivity: 912 i Series
Edition 2/Rev. 0
To Next Page
Loading...
