BRP-Rotax
MAINTENANCE MANUAL LINE
State of delivery
m WARNING
Engine and gearbox are delivered in “dry“ conditions (without fuel, oil and
coolant).
Before putting the engine into operation it must be filled with oil and cooling liquid. Use
only oil and coolant as specified.
See latest Operators Manual and Service Instruction SI-912 i-001 „Selec-
tion of suitable operating fluids“, current issue.
MAINTENANCE CONCEPT
General note The maintenance functions detailed in this Manual are divided into two categories:
• Maintenance I (Line Maintenance)
• Maintenance II (Heavy Maintenance)
Repairs beyond the levels detailed in Manual I and Maintenance Manual II are not recom-
mended as maintenance functions and must be conducted by an authorized overhaul
facility.
Maintenance I
(Line
Maintenance)
Chapter 00,05 and 12
The scope of line maintenance consists of servicing and adjustment of engine compo-
nents (including part wear). All procedures in this Manual are to be considered line
maintenance.
NOTE
Where applicable, you will be referred to the Heavy Maintenance Manual for work
above and beyond line maintenance.
Maintenance II
(Heavy
Maintenance)
Separate Manual.
Maintenance Manual II details removal, installation and repair of components or parts nor-
mally considered beyond the scope of the "Line Maintenance".
NOTE
This Manual can only be used in combination with Maintenance Manual I (Line
Maintenance), as it builds upon it.
00–00–00
Page 14
September 01/2018
Effectivity: 912 i Series
Edition 2/Rev. 0
To Next Page
Loading...
Need help?
General
