Rotax 912 Series Service Manual

73-00-00
page 50
May 01/2007
Effectivity 914 Series
Edition 1 / Rev. 0
d02623
BRP-Rotax
Maintenance Manual
■ CAUTION: Ensure that the total slip-on length is used for all
pressure connecting lines and that the clamps are fixed
securely.
In addition, all lines must be routed in such a way that scuffing and kinks
are avoided. See 73-00-00 sec. 3.4.5 and 73-00-00 sec. 3.4.6.
Reconnect plug connections to temperature sensors and throttle
potentiometer.
Check that the plug connections are attached securely.

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke