Rotax 914 series Maintenance Manual

73-00-00
page 50
May 01/2007
Effectivity 914 Series
Edition 1 / Rev. 0
d02623
BRP-Rotax
Maintenance Manual
■ CAUTION: Ensure that the total slip-on length is used for all
pressure connecting lines and that the clamps are fixed
securely.
In addition, all lines must be routed in such a way that scuffing and kinks
are avoided. See 73-00-00 sec. 3.4.5 and 73-00-00 sec. 3.4.6.
Reconnect plug connections to temperature sensors and throttle
potentiometer.
Check that the plug connections are attached securely.

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm