73-00-00
page 48
July 01/2008
Effectivity 914 Series
Edition 1 / Rev. 2
d04352
BRP-Rotax
Maintenance Manual
■ CAUTION: Ensure that the total slip-on length is used for all pressure
connecting lines and that the clamps are fixed securely.
In addition, all lines must be routed in such a way that scuffing and kinks
are avoided. See 73-00-00 sec. 3.4.5 and 73-00-00 sec. 3.4.6.
Reconnect plug connections to temperature sensors and throttle
potentiometer.
Check that the plug connections are attached securely.
To Next Page
Loading...
Need help?
General
