76-00-00
page 26
May 01/2007
Effectivity 914 Series
Edition 1 / Rev. 0
d02626
BRP-Rotax
Maintenance Manual
- Data display
See Figs. 76-19, 76-20, 76-21, 76, -22 and 76-23.
HISTORY_BUFFER: A subprogram for reading, displaying
and printing of the data stored in the TCU.
Fig. 76-21 shows that 8 control parameters
are displayed. The recording takes place at 6
minute intervals, whereby the highest value of
each period will be stored.
00200
00199
READ_DATA: Reads data such as serial number, time of
operation and the latest transmitted engine
data from the storage in the TCU. When 100
% is reached, the reading is complete.
◆ NOTE: If this command is carried out during creation
of a LOG file, the failure message “SERIAL
ACCESS DENIED” will appear. In this case,
repeat the reading procedure.
Fig. 76-19
Fig. 76-20
To Next Page
Loading...
