Rotax MMH-912 Series - Page 407

Effectivity 914 Series
Edition 1 / Rev. 2
78-00-00
page 13
July 01/2008
d04356
BRP-Rotax
Maintenance Manual
d) Check compressor wheel for clearance
See Fig. 78-6
Apply slightly a radial pressure onto the shaft whereby it must not
contact the compressor housing. Check the complete circumference of
360°.
e) Check wastegate lever
See Fig. 78-7
Check the wastegate lever for free movement. If it does not move
freely, lubricate the axle of the wastegate with LOCTITE Anti-Seize
8151, ROTAX part no. 297434.
Fig. 78-5
08467
08468
Fig. 78-6
Fig. 78-7
08463